Meter Options
Fluid Temperature (F) Fluid Type Meter size/Flow range End Fitting  
 
Electronics Model Flow Meter Model Price $ Price $ 0.00 0.00 Select Options below, then press Sanitary Liquid Meter Configurator
Electronics Options Electronic Model Accessories Meter Riser
Integral Amplifier Hoffer pickup coil with integral amplifier series RPM outputs a conditioned pulse 0-5V. Requires 8-30Vdc power supply. Available only for fluid temperature -40 to 185 F. Redi-Pulse Data Sheet

  Flow Range: .35 to 650 gpm Accuracy: 0.5%; 0.1% with electronic linearizer Bearing: carbon composite, FDA approved Fluid temperature: -40 to 850F Max pressure: end fitting limited Service: sanitary liquids Recommended mesh size: 40-100 Sanitary Data Sheet (pdf) User Manual (pdf)   Sanitary Liquid turbine meters Construction: 316/316L, 17.4-PH, 440C Meter Sizes: 1/4" to 3" Calibration: 10 point wet calibration End fitting: Tri-Clover Sanitary  
Temperature If process temperature spans across more than one of the pre-defined ranges, select the most extreme temperature range (the furthest from ambient).
Fluid EPA approved bearing material is selected based on the fluid pH value.
CAT1 CAT1 - microprocessor controlled, loop powered 10-30Vdc, linearized 4-20mA transmitter, analog output proportional to the flow rate, PC configuration software.
CAT2 CAT2 - versatile DC powered 13-30V transmitter, pulse frequency and analog output proportional to the flow rate, high and low alarms.
CAT3 CAT3 - microprocessor controlled, DC powered 13-30V, linearized pulse and analog transmitter, pulse scaled per unit of flow, analog output proportional to the flow rate, high and low alarms, PC configuration software.
HIT-2A HIT-2A - Rate and total indicator, microprocessor controlled, 8-30Vdc loop or battery powered, pulse out scaled per unit of flow, 4-20mA proportional to flow rate, alarm for rate or total, optional PC configuration software.