Loading Data...
Loading Data...
Loading Data...
Meter Options
Fluid Temperature (F)
Fluid
Type
Meter
size/Flow range
End Fitting
Integral Amplifier
Hoffer pickup coil with integral amplifier series RPM outputs a conditioned pulse 0-5V. Requires 8-30Vdc power supply. Available only for fluid temperature -40 to 185 F.
Redi-Pulse Data Sheet
Flow Range: .35 to 650 gpm
Accuracy: 1%;
Fluid temperature: -40 to 450F
Max
pressure: 6,000 psig, fitting limited
Service: clean, non-viscous liquid
Recommended mesh size: 20-100
Industrial Data Sheet (pdf)
User Manual (pdf)
Industrial turbine meters
Construction: 316/316L, 17.4-PH, 440C
Meter
Sizes: 1/4" to 3"
Calibration:
Average K factor
End
fitting: NPT
Temperature
If process temperature spans across more than one of the pre-defined ranges,
select the most extreme temperature range (the furthest from ambient).
Fluid
Fluid type and temperature is used to select optimal bearing material.
If the fluid is not listed and is known to be compatible with Hoffer bearings, you may select bearing type
at the bottom of the fluid list. If unsure, please email us the fluid name and temperature range
for verification.
CAT1
CAT1 - microprocessor controlled, loop powered 10-30Vdc, linearized 4-20mA transmitter, analog output proportional to the flow rate, PC configuration software.
CAT2
CAT2 - versatile DC powered 13-30V transmitter, pulse frequency and analog output proportional to the flow rate, high and low alarms.
CAT3
CAT3 - microprocessor controlled, DC powered 13-30V, linearized pulse and analog transmitter, pulse scaled per unit of flow, analog output proportional to the flow rate, high and low alarms, PC configuration software.
HIT-2A
HIT-2A - Rate and total indicator, microprocessor controlled, 8-30Vdc loop or battery powered, pulse out scaled per unit of flow, 4-20mA proportional to flow rate, alarm for rate or total, optional PC configuration software.
|